General information
The Z-70 is a rugged handheld air-burn LIBS designed specifically for material ID testing. The Z-70 is very user-friendly.
The Z-70 uses a 6 mJ/pulse laser which is the most powerful in the LIBS sorting market. Traditional material ID instruments use high repetition 150 μJ/pulse lasers that are too weak to properly clean dirty surfaces. This leads to wrong matches and extra time prepping the sample surface. Any time gained in testing versus XRF is lost in sample preparation and bad data. The Z-70 is designed for testing with real world samples. An integrated air pump make sure your window stays cleaner for longer and accurate data is being obtained.
Scannable alloys:
- Aluminum: Be, Mg, Al, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Zr, Sn, Pb, Bi, Ag
- Stainless Steels: Al, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Nb, Mo, W
- Iron Base: Si, Ti, V, Cr, Mn, Fe, Cu, Ni, Nb, Mo, Pb
- Copper Base: Be, Al, Si, Cr, Mn, Fe, Ni, Cu, Zn, Ag, Sn, Pb, Bi
- Nickel Base: Al, Si, Ti, Cr, Mn, Fe, Co, Ni, Cu, Nb, Mo, W, Hf, Ta, Re
- Titanium Base: Al, Ti, V, Cr, Fe, Cu, Zr, Nb, Mo, Sn
- Magnesium Base: tba
